Hubcaps & Wheel Covers 13 inch — Set of 4
Looking for 13 inch hubcaps nobody else has? This is not a catalogue of patterns: you upload your own image — a photo, a logo, an illustration — and we print it in high-definition UV directly onto the wheel cover.
What exactly is in one order?
The product is a complete kit: four 13-inch hubcaps with the same design, one per wheel, shipped in the same parcel. They are not sold individually.
What if I get the size wrong?
Write to us before ordering with the code marked on your tyre and we will check it together. Because each hubcap is printed with your own image, it cannot be taken back once made — which is why checking first matters.
Is 13 inch really your size?
The answer is written on your tyre sidewall. Look for a sequence such as 195/65 R13: the number right after the R is your wheel diameter. If it reads 13, this is your page. Full explanation in our sizing guide.
Other diameters: 12" · 14" · 15" · 16" · 17".
Vehicles commonly fitted with 13 inch wheels
This table is indicative: the same model often exists in several diameters depending on trim and year. Always trust the tyre marking, never the model alone.
| Make | Models commonly fitted |
|---|---|
| Toyota | Yaris (early) |
| Honda | Fit / Jazz (base) |
| Nissan | Micra |
| Kia | Rio (base) |
What you get
- A set of 4 hubcaps for €84.90 — one per wheel, all in the same design, in a single parcel.
- €21.23 per hubcap — €84.90 for the set of 4. Shipping is added at checkout, from the parcel weight and the destination.
- UV printing cured into the material: UV-proof, scratch-resistant, car-wash safe.
- Clips on in 5 minutes, no tools, no drilling, fully reversible — how to fit them.
- Made to order: your design exists in a single copy — nobody else drives with it.
Frequently asked questions
Will it really stay on at highway speed?
Yes. The cover clips onto the rim edge of a steel wheel via a retaining ring that presses evenly all the way round — the same principle as factory hubcaps. The one common cause of loss is an incomplete fit: you need to hear the click all the way around.
Does it fit alloy wheels?
No. Wheel covers clip onto steel wheels, which have the rim lip needed to hold them. An alloy wheel has nothing to grip — and you would not want to hide an alloy wheel anyway.
Does an automatic car wash damage the print?
No. UV ink is cured into the material, not laid on top like a sticker. It withstands brushes, pressure washers, detergents and sunlight — that is exactly why we use it rather than vinyl.
What about winter and road salt?
Reinforced polypropylene does not rust and salt does not attack UV printing. An occasional rinse with clean water is enough — easier to maintain than an alloy wheel, which pits.
What image quality should I send?
The original file, never a screenshot. Below 1,800 pixels the result turns blurry once scaled up to wheel size. The configurator warns you if the resolution is too low.
One tip before ordering
The printed area of a wheel cover is several hundred millimetres across. Send the original file of your image rather than a screenshot — the difference is very visible at that scale.