Motorhome hubcaps: Fiat Ducato, Citroën Jumper, Peugeot Boxer

Most motorhomes and camper conversions are built on a Fiat Ducato, Citroën Jumper or Peugeot Boxer, on steel wheels. A set of 4 printed hubcaps (wheel trims in the UK) is all it takes for your van to look like no other on the campsite.

What size for a camper van?

ModelWheel size
Fiat Ducato I15 or 16 inch
Fiat Ducato II16 inch
Fiat Ducato III16 or 17 inch
Fiat Ducato IV16 or 17 inch
Citroën Jumper16 or 17 inch
Peugeot Boxer16 or 17 inch

The same generation can come in several sizes depending on the trim. The right one is printed on the tire sidewall: R15 means 15 inch.

Spot your van at a glance

On a campsite, every white van looks the same. A hibiscus, a galaxy, a photo of your favorite spot or your van’s name on all four wheels, and you see it from afar.

What about the caravan?

Caravans and trailers often run on steel wheels too. The size is on the tire, and we make 12 to 17 inch. For van conversions, also read our guide to hubcaps for vans.

Ready-made patterns

How it works

  1. Read the size on your tire sidewall: R14 means 14 inch.
  2. Pick the base, white or black, then a pattern or your own image.
  3. You get a preview by email as soon as you order. The print is checked before shipping.
  4. Made in about 5 days, then shipped. Fitting is by hand and takes 5 minutes.

Design hubcaps for my van →

See also

FAQ

What size hubcaps for a Fiat Ducato?

Usually 15 or 16 inch on early generations, 16 or 17 inch on recent ones. The right size is printed on the tire.

Can you print the van’s name?

Yes: prepare an image with the name, or upload a drawing. The preview by email shows the result before printing.

How much does it cost?

From €99.90 for a set of 4 in 12 inch to €189.90 in 17 inch, shipping included to the UK, France, Germany, Italy, Spain, Belgium and the Netherlands.